CAD model selection

HELP_VARIABLE

PRODUKTABBILDUNG

Produktabbildung

ARTICLE_ID

Article number

2205023

ARTICLE_NAME

Type code

Yonos GIGA2.0-I 100/1-8/2,2

LOD

MANUFACTURER_NAME

Manufacturer

WILO SE

DESCRIPTION_SHORT

Short text

In-line twin-head pump with high efficiency with EC motor and electronic power adjustment in glanded pump design. Version as single-stage low-pressure centrifugal pump with flange connection and mechanical seal.

DESCRIPTION_LONG

Tender text

In-line pump with high energy efficiency with EC motor of energy efficiency class IE5 in accordance with IEC 60034-30-2, hydraulics with minimum efficiency index MEI ≥ 0.4 and electronic power adjustment in glanded pump design. The pump is configured as a single-stage low-pressure centrifugal pump with flange connection and mechanical seal. The Yonos GIGA2.0-I has been predominantly designed for pumping heating water (acc. to VDI 2035), cold water and water-glycol mixtures without abrasive substances in heating, air conditioning and cooling systems. Design: *Single-stage low-pressure centrifugal pump with one-piece shaft in monobloc design *Spiral housing in in-line design (suction and discharge ports with the same flanges in a line) *PN 16 flange – in accordance with EN 1092-2 *Pressure measuring connections (R 1/8) for mounted differential pressure sensor (version ...-R1 without differential pressure sensor) *Pump housing and lantern/motor flange with cataphoretic coating as standard *Mechanical seal for pumping water up to Tmax. = +120 °C. A glycol admixture of 20 % to +40 % by volume is permitted up to T ≤ +40 °C. An alternative mechanical seal must be provided in water-glycol mixtures with glycol proportions > 40 % up to max. 50 % by volume and a fluid temperature of > +40 °C up to max. +120 °C or fluids other than water. *Connection voltages: **3~440 V ±10 % 50/60 Hz; 3~400 V ±10 % 50/60 Hz; 3~380 V -5 % +10 % 50/60 Hz **Version M-: 1~220 V … 240 V (±10%), 50/60 Hz *Compliance with electromagnetic compatibility without additional measures **Interference emission for residential environment according to EN 61800-3:2018 **Interference immunity for industrial environments according to EN 61800-3:2018 Control modes: *Variable differential pressure (dp-v) *Constant differential pressure (dp-c) *Constant speed (n-const.) *User-defined PID control Functions: *Operating modes of twin-head pump: Main/standby operation, efficiency-optimised parallel operation for dp-c and dp-v *Integrated full motor protection Display in the "Home screen" of the graphic display: *Control mode currently set *Current setpoint *Current actual value *Current volume flow (only if a differential pressure sensor is connected) *Current power consumption Version: *1 analogue input: 0 ... 10 V, 2 ... 10 V, 0 ... 20 mA, 4 ... 20 mA only for sensor value from differential pressure sensor *1 analogue input: 0 ... 10 V, 2 ... 10 V, 0 ... 20 mA, 4 ... 20 mA only for external setpoint sensor *1 digital input (Ext. OFF) *2 Signal relays for run signals and fault messages *Slot for Wilo-CIF modules with interfaces for building automation (BA) (optional accessories: CIF modules Ethernet, Modbus RTU, BACnet MS/TP, LON, PLR, CAN) *Wilo Net as Wilo system bus for communication during twin-head pump operation *Automatic emergency operation with definable pump speed for exceptional circumstances, e.g. bus communication or sensor value malfunction *Rotatable, graphic colour display (2 inches) with one button manual operation level *Integrated dual pump management (twin-head pumps are prewired) when using 2 single pumps as twin-head pump unit (connection via Wilo Net) *Cable break detection when using an analogue signal (in connection with 2 ... 10 V or 4 ... 20 mA) *Standard condensate drainage holes in the motor housing (closed upon delivery) *Air vent valve on the lantern Scope of delivery: *Pump *Installation and operating instructions and declaration of conformity Accessories must be ordered separately: 3 mounting brackets with fixation material for installation on a base *Blind flanges for twin-head pump housing *For connection to building automation: **CIF module PLR **CIF module LON **CIF module BACnet MS/TP **Modbus RTU CIF module **CIF module CANopen **CIF module Ethernet Multi-protocol (Modbus TCP, BACnet/IP) **Connection M12 RJ45 CIF Ethernet *Differential pressure sensor DPS 2 ... 10 V *Differential pressure sensor DPS 4 ... 20 mA

EF023103

With oval counterflanges

Angle to first bolt hole

22.5

Angle to first bolt hole

22.5

Angle electrical cabinet 1

Thickness flange (incl. sealing edge)

Outer diameter of flange

220

Outer diameter of flange

220

D21

Diameter bolt hole

D22

Diameter bolt hole

D41

Diameter sealing edge

156

D42

Diameter sealing edge

156

Diameter motor

171

DN1

Nominal inner diameter

100

DN2

Nominal inner diameter

100

DO1

Outer pipe diameter connection

106

DO2

Outer pipe diameter connection

106

Thickness sealing edge

Diameter pump housing

370

Pitch circle

180

Pitch circle

180

Connection length

250

Connection length

250

LE1

Height pump housing

210

LE2

Centre connection to end motor

513

LE3

Length electrical cabinet

317

LE4

Distance connection to beginning of motor

187

LE5

Distance to centre connection

117

LE6

Distance connection to electrical cabinet

234

LE7

Length to top side electrical cabinet

260

LE8

Width electrical cabinet

267

Number of bolt holes

Working length

250

Working length

250

DIAMD1

Dimensions

300

Dimensions

156

Dimensions

40.0

Dimensions

222

Dimensions

117

Dimensions

120

No Third-party Cookies supported

Yonos GIGA2.0-I 100/1-8/2,2 2205023 2