Catalog navigation
All catalogs
Geometric Search
CAD model selection
Add for comparison
Selectable products: 1
Company
ABB Low Voltage & Systems
Description
RV5 - Surge suppressor
Bill of material
ABB - 1SBN050010R1002 + RV5/250 Surge Suppressor
Product ID
1SBN050010R1002
Extended Product Type
RV5/250
Invoice Description
RV5/250 Surge Suppressor
Description
varistor - AC or DC control voltage
Long Description
RV5/250 is a varistor surge suppressor designed to reduce the maximum overvoltage peak value and to limit or even completely eliminate the high pre-damping voltage frequencies, when used with an AC operated conventional contactor for a rated control circuit voltage between 110 ... 250 V AC 50/60Hz or with a DC operated conventional contactor for a rated control circuit voltage between 110 ... 250 V DC. The operation of inductive circuits causes overvoltages, in particular on opening of the contactor coil. The electromagnetic energy stored in the coil during contactor closing is restored on opening in the form of surges, the slope and amplitude of which may rise to several kilovolts. A number of drawbacks are observed ranging from interference on the electronic devices to breakdown of insulators and even destruction of certain sensitive components. Note: A varistor is a resistor whose value decreases to a very large extent when a certain voltage is applied at its terminals. Advantages: - the surge suppressor is clipped onto the top or side part in regards with the contactor or contactor relay base design without change in device overall dimensions. - high energy absorption: good damping - Unpolarized system. Drawback: clipping as from the varistor operating voltage, thus voltage front up to this point.
International product number
3471522121349
Product number of the Manufacturer
1SBN050010R1002
Type of accessory/spare part
Other
Customs tariff number
85363030
Deeplink product page
Link to product detail page
Type
RV5/250
Procurement
Last updateJul 25, 2025, 10:00 AM
Part number1SBN050010R1002
All information without guarantee
Last update: Jul 25, 2025, 10:00 AM
Preview - Generation
Preview
3D
2D
The preview does not represent the part configuration anymore.You have to generate a new preview.

Classifications
ETIM 10.0
Accessories/spare parts for low-voltage switch technology:
Discrete electronic component:
CNS
Object Properties:
Order Number: 1SBN050010R1002
Description long: RV5/250 is a varistor surge suppressor designed to reduce the maximum overvoltage peak value and to limit or even completely eliminate the high pre-damping voltage frequencies, when used with an AC operated conventional contactor for a rated control circuit voltage between 110 ... 250 V AC 50/60Hz or with a DC operated conventional contactor for a rated control circuit voltage between 110 ... 250 V DC. The operation of inductive circuits causes overvoltages, in particular on opening of the contactor coil. The electromagnetic energy stored in the coil during contactor closing is restored on opening in the form of surges, the slope and amplitude of which may rise to several kilovolts. A number of drawbacks are observed ranging from interference on the electronic devices to breakdown of insulators and even destruction of certain sensitive components. Note: A varistor is a resistor whose value decreases to a very large extent when a certain voltage is applied at its terminals. Advantages: - the surge suppressor is clipped onto the top or side part in regards with the contactor or contactor relay base design without change in device overall dimensions. - high energy absorption: good damping - Unpolarized system. Drawback: clipping as from the varistor operating voltage, thus voltage front up to this point.
Description short: RV5/250 Surge Suppressor
Manufacturer / brand name: ABB
Product website: https://new.abb.com/products/ABB1SBN050010R1002
Customs Tariff Number: 85363030
GTIN-Code: 3471522121349
ETIM 8.0
Accessories/spare parts for low-voltage switch technology:
Type of accessory/spare part: Other
ETIM 9.0
Accessories/spare parts for low-voltage switch technology:
Discrete electronic component:
eclass
27-37-13-90 - Component for low-voltage switching technology (unspecified):
27-37-13-92 - Component for low-voltage switching technology (accessories):